ER001807

人機界面控制電源箱内配置了PLC及HMI作爲加熱器溫控器的控制及通訊資料匯整，使用RS485的通訊協定可以同時控制及接收200個點位的溫控器資料。内有多個電源回路，每個回路都有單獨的漏電斷路器及熔斷式保險絲作爲安全保護機制，且個別回路都是獨立的，不會互相影響。控制電源箱也配置有EMO按鈕，當有意外發生時，按壓EMO可以立即斷電，以保障操作人員的生命安全。The human-machine interface control power box is equipped with PLC and HMI as the control and communication data collection of the heater thermostat. Using the RS485 communication protocol, it can control and receive 200 points of thermostat data at the same time. There are multiple power circuits inside, each circuit has a separate leakage circuit breaker and fuse as a safety protection mechanism, and the individual circuits are independent and will not affect each other. The control power box is also equipped with an EMO button. When an accident occurs, pressing the EMO can immediately cut off the power to ensure the safety of the operator.

加熱帶電源控制箱_1. 加熱器電源供應 2. 溫控器資料匯整 3. CMS通訊對接 1. Heater power supply 2. Temperature controller data collection 3. CMS communication interface /尺寸(L*W*D= 450*450*200 mm)

1

USED

inquiry only

GY0007

1.依客戶需求，可以配5/6/9/10個電源loop. It can be equiped with 6 to 9 power supply loops in terms of customer requirement. / 2.每個電源Loop皆串接有個別回路的漏電保護器及15A的熔斷式保險絲 Every power supply loop has it's own ELB and 15A fuse design individually. / 3.控制箱内有PLC可控制溫控器及作爲CMS的對接口 There is a PLC in the control box that can control the thermostat and serve as the interface for the CMS. / 4.有人機界面(HMI)可隨時監看溫控器的狀況及記錄異常報告 The human-machine interface (HMI) can monitor the status of the thermostat and record abnormal reports at any time / 5.可以設定溫度設定值(SV)、溫度上下限警報值調整、溫度警報模式(警報隔離功能) You can set the temperature set value (SV), temperature upper and lower limit alarm value adjustment, and temperature alarm mode (alarm isolation function) / 6.RS485通訊協定 communication protocol